| My Symbols tab
|
-
Current project symbol library — Select
symbol library to work with.
-
Symbol Manager — Opens the
Symbol Manager dialog.
- Scale
Factor — Enter scale factor for symbols that do not need to be
drawn to scale (sockets, switches etc).
- Std.
Text-Size — Enter standard size for texts in drawing.
- Subtype
Text-Size — Enter default subtype text size.
- rotate
symbols at insertion — When checked, symbols will first be placed
in symbol and then the insertion angle needs to be set.
- Cyclic
Symbol Dialog — When checked, symbol placement functions (in Symbol
Manager) will repeat themselves in a cycle until cancelled.
|
| Building Structure tab
|
- Select
area drawing belongs to — Lists areas treeview in the current
drawing.
- Enter
room shapes online — When checked, room shapes can be entered
directly before using an Building Electrical Systems function.
 — Opens the
Building Manager / Classification System dialog.
|
| 3D tab
|
- Ceiling
Height — Set Ceiling Height for drawing.
- Floor
Level — Enter Floor Level for drawing.
- Base
Angle — Enter Base Angle of drawing manually.
- ›
CAD — Set Base Angle by clicking two points in drawing.
-
2D/3D — Options available:
-
2D - Symbols are inserted in 2D only
-
3D - Symbols are inserted in 3D only
-
2D/3D - Symbols are inserted in both 2D and 3D
-
Collision Detection — Options for clash detection:
-
Display Clearance 1 — Toggle display of Clearance space 1 on/off.
-
Display Clearance 2 — Toggle display of Clearance space 2 on/off.
|
| OK
|
Saves changes.
|
| Cancel
|
Closes the Drawing Setup dialog
|
Used to setup design file through
Drawing Setup dialog.
